# item.guide
Side-by-Side Comparison Tripod & Rigging

ARRI Rosettes & Pins vs. Manfrotto RC2

Comparing 2 standards across 11 specifications. 11 key differences identified.

Comparing:
ARRI Rosettes & Pins
Manfrotto RC2

The ARRI Rosette (31.8 mm diameter with 60 radial teeth and an M6 central thread) and ARRI 3/8"-16 Anti-Twist Locating Pins (dual 3.0 mm indexing holes flanking a 3/8"-16 screw) are the de facto cinema rigging standards developed by Arnold & Richter Cine Technik (ARRI) to prevent camera cage accessories from twisting under heavy rotational torque.

View full ARRI Rosettes & Pins spec sheet →

The Manfrotto RC2 System (utilizing the 200PL rectangular quick-release plate) is the dominant consumer and prosumer quick-release standard in photo/video heads (Manfrotto 496, 498, Befree, 322RC2). Featuring a drop-in tapered aluminum wedge plate with an automatic spring-loaded locking cam and secondary brass safety catch.

View full Manfrotto RC2 spec sheet →

Specification Comparison Table

11 Parameters
Parameter / Spec
Primary Applications
Cinema handgrips (ARRI Alexa, RED, Sony Venice, FX9), extension arms, heavy top handles, monitor arms Manfrotto Befree travel tripods, compact ball heads, 3-way pan/tilt heads, monopod heads
ARRI Rosette Outer Diameter
31.8 mm (1.25 in) —
Tooth Configuration
60 radial interlocking teeth (enables precise 6.0° rotational index adjustments) —
Rosette Center Bolt
M6 × 1.0 mm internal metric thread (or 1/4"-20 on some consumer cages) —
ARRI 3/8"-16 Anti-Twist Pattern
Central 3/8"-16 screw flanked by two 3.0 mm locating pin holes at 15.0 mm spacing —
Torque Resistance
Highly resistant to rotational slippage when properly seated, since the teeth physically mesh together rather than relying on friction alone —
Plate Model Designation
— Manfrotto 200PL (200PL-PRO adds Arca-Swiss side rails)
Plate Dimensions
— Approx. 52.0 × 42.0 × 10.0 mm (trapezoidal tapered wedge profile)
Mounting Mechanism
— Snap-in auto-locking lever with secondary flip-down brass safety lock lever
Mounting Stud
— Captive 1/4"-20 D-ring screw with folding thumbscrew bail
Rubber Anti-Twist Grip
— Ribbed synthetic rubber grip pad prevents camera twist under vertical torque